How to Turn Halo Fences On or Off
Current Halo App
- iOS: Version 3.0.1 or later
- Android: In Development
How to Enable or Disable Fence Feedback
There are two ways to manage fence feedback, depending on whether you want to change a specific fence or all fence feedback for a pet.
Enable or Disable a Specific Fence
- Open My Fences.
- Tap the Status indicator in the header.
- The Fence Feedback menu will appear.
- Toggle Fence Feedback on or off.
This setting applies to the selected fence only.
Enable or Disable Fence Feedback for a Pet
- Go to More > Feedback Settings.
- Select your pet.
- Choose Fence Mode or Tracking Mode.
Fence Mode — Fence feedback is enabled for your pet.
Tracking Mode — All fence feedback is disabled for your pet. Location tracking remains active, but no fence feedback is sent to the collar.
We're happy to help with any questions in our virtual Dog Park, so don't hesitate to reach out if you have any questions.
Legacy Halo App
- iOS: Version 2.15 (1045) or earlier
- Android: Version 2.15 (603) or earlier
Turn On All Fences
Follow these steps to turn on all fences for your pet's Halo Collar:
- Click the "My Map" icon in the lower-left corner of the screen
- Click your pet icon under "Find and Manage Pets"
- Slide up the Pet detail card
- Click the button next to "Fences"
- The button will turn blue
- The label will change from "Ignore" to "Feedback"
- This will turn on all fences associated with that pet
Important Note:
Make sure that it says "Synchronized" in the top right corner of the "Feedback for (dog's name)" on the Pet Card.
- If it says "Synchronizing", the information is still being transferred from your Halo App to the Halo Collar
- The fences are not on yet until synchronization is complete
This image indicates that your fences are turned on manually
Turn Off All Fences
Follow these steps to turn off all fences for your pet:
- Click the "My Map" icon in the lower-left corner of the screen
- Click your pet icon under "Find and Manage Pets"
- Slide up the Pet detail card
- Click the button next to "Fences"
- The button will turn gray
- The label will change to "Ignore"
- This will turn off all fences associated with that pet
Important Note:
Make sure that it says "Synchronized" in the top right corner of the "Feedback for (dog's name)" on the Pet Card.
- If it says "Synchronizing", the information is still being transferred
- The fences are not off yet until synchronization is complete
This image indicates that your fences are turned off manually
Additional Notes
- You can select one pet at a time and enable or disable fences just for that pet
- However, the on/off setting applies to ALL fences for that specific pet
- When a fence is enabled or disabled:
- A message is sent from the app to the Halo System
- The app then sends that message to the Halo Collar
- Always confirm that your app is synchronized with the collar before assuming fences are on or off
- If the message was not sent successfully, the collar may still operate based on the previous fence status, even if the app shows your change
- If it says "Synchronizing", the update is still in progress and has not been applied yet
Comments
0 comments
Article is closed for comments.