1. Ensure the Bluetooth setting on your phone is on

2. Press and hold the Halo Logo on the Beacon for 5 seconds.

3. Wait until the blue light stays solid for 5 seconds, indicating the Beacon is on.

• • If you see the blue 'power' light flash once, it confirms the Beacon is powered on.
  • If the 'power' light blinks 5 times in succession, it means the Beacon is now off.

Once your beacon is turned on

1. Open the Halo App on your device.
2. Navigate to the settings tab.
3. Tap on "My Beacons" and then select the (+Add Beacon) option.
4. Choose the specific Model of your Halo Beacon.
    
   • The app will begin searching for nearby beacons. This might take up to 60 seconds.
     Identifying and Selecting Your Beacon:
5. All Beacons within range will appear on the screen, displayed with their serial numbers.
   Match the serial number shown on the app with the one on the back of your Beacon (it typically looks like "AC233F 852872").

Configuring the Beacon

1. Once your Beacon is selected in the app, give it a name.
2. Choose its function – either as a 'keep away' zone or an 'ignore' zone.

Setting the Beacon Radius

1. Adjust the Beacon’s radius to define the size of the 'keep-away or ignore fences" zone.
2. You can always modify the Beacon ranges later by going to Settings -> Beacons in the app.

Your My Beacons screen should now appear like this:

If you have any further questions and would like to speak to our live support team, please feel free to reach out using the following article: How to Contact Customer Support and we'll be happy to help!