How to Charge the Halo Collar Follow
NOTICE:
|
Objective
- Demonstrate how to properly charge your Halo Collar
Background
It is important to fully charge the battery prior to the first use of your Halo Collar. Keep in mind that it takes about two hours to fully charge a fully depleted battery. The Halo Collar will only charge while within the temperature range of 32° to 104°F (0° to 40°C). We recommend charging the Collar near a window to ensure that has a clear view of the sky to update properly.
We highly recommend using a USB-C ported Block and a USB-C to USB-C cable.
Procedure
For Charging the Halo 3 Using the Magnetic USB-C Method:
- Connect your USB-C cable to the small pogo pin adapter included in your Halo kit. Refer to the image below for guidance.
- After securing the USB-C charger to the pogo pin adapter, align the adapter with the pogo pin port located on the collar.
- Ensure that the adapter magnetically attaches to the port. If done correctly, your collar will begin charging.
- The status light will blink green as the collar is charging.
- The Halo Collar has a full charge when the status light turns solid green, and you may remove the charging cable from the Halo Collar.
For Charging our older models using the standard USB-C Method:
- Plug the large, rectangular USB-A end of the cable into the Halo AC/DC charging block.
- Plug the AC/DC charging block into a wall power source that is a convenient location for regular, nightly charging.
- To charge the collar, access the USB-C receptacle/port on your Halo Collar by lifting the tab of the USB-C cover and rotating it out of the way (see the figure below). Do not unscrew the charging port cover.
- Insert the small, oval USB-C end of the charging cable into the port on the collar. (The orientation of the plug does not matter.)
- The status light will blink green as the collar is charging.
- The Halo Collar has a full charge when the status light turns solid green, and you may remove the charging cable from the Halo Collar.
Additional Notes
The USB-C port is weatherproof, but it is important to keep the port clean. To prevent dirt build-up, be sure to replace the USB port cover on the collar each time you remove the charging cable.
If you have any further questions and would like to speak to our live support team, please feel free to reach out using the following article: How to Contact Customer Support and we'll be happy to help!
Comments
0 comments
Article is closed for comments.